Skip to main content Scroll Top
CASE HISTORY:  Machining time reduced by 22,5% with Eureka Chronos
Machining time reduced by 22,5% after optimization with Eureka Chronos
Case History

Machining time reduced by 22,5% and perfect surface quality of the worked pieces.

A new customer decided to test Eureka Chronos by comparing two works of the same piece. The first processing was carried out with the original NC program, while the second with the optimized NC program.

Go to results
Schedule a demo

Eureka Chronos

Feedrate optimizations

Processing details

  • Material: steel, size 210*142*42mm (2 pieces)

  • Roughing with tool: D16*R3*30*120L*4F, cutting depth 0.3mm, cutting width 9mm, feedrate speed F800/S2500

  • Machine tool: GF P800U

Results

Same Surface Quality

Machining time is reduced from 8 hours and 22 minutes to  hours and 29 minutes
22.5% time saved
CAse hiatory 1
case-history-chronos-5
Screenshot

Eureka virtual machining
solutions

Eureka G-Code

Reduce machine setup time, avoid crashes and optimize cycle time by simulating your G-code programs

more about

NC Coder

Program and simulate Swiss type and multi-channel mill-turn machines using your CAM

more about

Eureka Chronos

Reduce machining time and extend tool life up to more 2X or more by optimizing the G-code programs generated by your CAM

more about

Eureka Robot

Simulate, verify, and optimize industrial robot paths for welding, deburring, trimming, and more.

more about